|
|
INC Products > RS-422/485 多串口卡 > 通用PCI介面卡 |
|
|
| |
 |
| |
Introduction
SUNIX IPC-P2104SI, industrial standard universal PCI serial communication card, allows users to expand four RS-422/485 ports on PC-based system. Each serial port achieves data rates up to 921.6 Kbps and utilizes 16C950 UART with an on-chip 128-bytes hardware FIFO buffer for reliable, high-speed serial I/O. With SUNIX patented Auto-Switching RS-422/485 and RS-485 AHDC™ technology, user can easily manage different serial interfaces selection and RS-485 signal direction control. Under RS-485 mode, the board can connect up to 31 daisy-chained RS-485 devices within a range of 1.2 km.
SUNIX IPC-P2104SI uses on-board 2500V optical isolators which achieve on power and serial signal lines to protect your PC and equipment against damages from ground loops, increasing system reliability in harsh environments. To further increase reliability, this board offers 500W surge protection technology, protecting your system from abrupt high voltage surges, such as those caused by lightning. SUNIX serial board supports a wide variety of operating systems, including Windows, Linux, DOS, and UNIX. It is the best serial communicating solution for industrial and harsh environment applications.
Features
- Expands 4 independent RS-422/485 serial ports with communication speeds up to 921.6Kbps
- High reliability SUN1999 16C950 compatible UART controller on-board
- Compliance with PCI 33MHz Ver 3.0, 2.3, 2.2 & 2.1 specifications
- Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
- RS-422/485 auto detect and switching technology – jumper and software free
- AHDC/CS™ technology for collision free communication
- 2.5 KV Isolation Protection for all signal and power
- Circuit Damage Protection of 500W Peak Per IEC 61000-4-5
- Ultra low power consumption design for Green Environment
- Built-in ±15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
- Plug-n-Play, I/O address and IRQ assigned by BIOS
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval
- Support Microsoft Windows, Linux, and DOS
Specifications
Serial Communication
| Interface |
RS-422/485 |
Baud rate |
50bps ~921.6Kbps |
| Controller |
SUNIX SUN1999 (16C950 UART Compatible) |
Stop bit |
1, 1.5, 2 |
| BUS |
Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
Parity |
even, odd, none, mark, space |
| No. of Port |
4-port |
Flow Control |
Xon/Xoff (software) |
| IRQ & IO |
Assigned by System |
FIFO |
128byte Hardware |
| Signal |
RS-422: TxD+, TxD-, RxD+, RxD-, GND, RI 4-wire RS-485: TxD+, TxD-, RxD+, RxD-, GND 2-wire RS-485: Data+, Data-, GND |
| ESD Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge |
| Surge Protection |
500W peak surge protection for all signal lines meet IEC 61000-4-5 |
| Isolation |
2.5 KV Isolation Protection for all signal and power |
| PCB Connector |
DB44 Female |
Driver Support
| Microsoft Client |
XP/Vista/7 (X86/X64) |
| Microsoft Server |
2000/2003/2008 (X86/X64) |
| Microsoft Embedded |
Windows CE5.0/6.0/XP Embedded/POS Ready 2009/Embedded System 2009/Embedded Standard 7 |
| Linux |
Linux 2.4.x/2.6.x/3.x |
| DOS |
DOS |
Regulatory Approvals
| Hardware |
EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS |
| Software |
Microsoft WHQL Windows ◆ Microsoft Client: XP/Vista/7 (X86/X64) ◆ Microsoft Server: 2000/2003/2008 (X86/X64) |
Environment
| Operation Temperature |
0 to 70°C (32 to 158°F) |
| Operation Humidity |
5 to 95% RH |
| Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension |
125 x 63 mm |
| Bracket |
Standard 121 mm / Low Profile 80 mm |
| Bracket Space |
1 |
|
|
|
|